Design & Reuse
arrow A/D Converter (ADC) (530)
arrow Amplifier (102)
arrow Analog Comparator (21)
arrow Analog Filter (27)
arrow Analog Front Ends (38)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (3)
arrow Clock Synthesizer (83)
arrow Coder/Decoder (CODEC) (107)
arrow D/A Converter (DAC) (222)
arrow DC-DC Converter (67)
arrow DLL (743)
arrow Graphics & Video Modules (5)
arrow Oscillator (342)
arrow Oversampling Modulator (8)
arrow PLL (1723)
arrow Power Management (855)
arrow RF Modules (82)
arrow Sensor (39)
arrow Sensors and Monitors (45)
arrow Switched Cap Filter (1)
arrow Temperature Sensor (143)
arrow Other (497)
855 IP
51
6.0
Ultra-Low-Power Bandgap Voltage Reference in 12nm CMOS
The ODT-REF-SV1P8-12 is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve high ...
52
6.0
Internally Compensated LDO - 100mA Output
The ODT-LDO-IC-100M-4T is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excel...
53
6.0
External Compensated LDO - 300mA Output
The ODT-LDO-EC-300M-16FFCT is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve exce...
54
5.0
Bandgap Reference 1.22V bandgap, 1V & 0.5V Output
The ShortLink voltage reference and bias generator 'SL40LP_1V2BG_1' is based on a bandgap architecture. Two different reference voltages (1.0V and 0.5...
55
5.0
DC/DC Buck Converter in GF 22FDX
DC/DC buck converter in GF 22FDX with low-quiescent current and high efficiency at light load...
56
5.0
Accurate BandGap Voltage Current Reference Generator
CT20308 is a buffered accurate reference voltage generator, including a low pass filter with an external capacitor for noise reduction and PSRR improv...
57
5.0
Accurate BandGap Voltage/Current Reference Generator
CT20307 is an accurate reference voltage generator. In order to achieve a total error <2%, the amplifier in the bandgap core block implements an of...
58
5.0
Voltage Regulator LDO, Adjustable 1.1V Output
The ShortLink voltage regulator 'SL40LP_1V1LDO_1' is an analogue Low Drop-Out regulator based on a two-stage architecture. The architecture allows the...
59
5.0
Combined Power On Reset and Brown Out Reset
Power-On-Reset and Brown-Out-Reset with programmable detection thesholds...
60
5.0
Combined Power On Reset and Brown Out Reset in TSMC 40nm ULP
Combined Power On Reset and Brown Out Reset...
61
5.0
Combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL
Combined Power-On-Reset and Brown-Out-Reset in TSMC 22ULL...
62
5.0
Combined Power-On-Reset and Brown-Out-Reset in TSMC 40 ULP
Combined Power-On-Reset and Brown-Out-Reset in TSMC 40ULP process...
63
5.0
Positive and negative voltage-glitch detector protecting against fault-injection attacks
The Voltage Glitch Detector is a fully integrated analog IP intended to monitor the voltage supply so as to protect the system against fault injection...
64
5.0
Low Power BandGap Reference with chopper in SMIC 40nm
The IP is a Band-gap reference generator circuit. In the core block, with the use of chopper, the random error caused by the offset of the opamp is co...
65
4.0
Band Gap Reference
The designated IP is a very low power, high precision band gap reference circuit intended for integration into 130nm CMOS technology System on Chips. ...
66
4.0
Nano power DC-DC converter in TSMC 40uLP with ultra-low quiescent current and high efficiency at light load
DC/DC buck converter in TSMC 40ULP supporting 1.8 to 5.5 V input voltage with low quiescent current and high efficiency at light load....
67
4.0
Capless Analog LDO Regulator
HCLTech offers a low drop-out (LDO) voltage regulator that has been designed in a 40nm GF technology. It offers benefits of low dropout voltage, micro...
68
4.0
Capped LDO Regulator
HCLTech offers A low drop-out (LDO) voltage regulator has been designed in a 40nm tsmc technology. It offers benefits of low dropout voltage, micropow...
69
4.0
BGR + V-I Bandgap Reference Circuit
HCLTech offers IP Bandgap (BGR) bgr_1p2_t40_v1 generates precision reference voltage (0.4V ~ 1.2V) and current reference (1.005µA ~ 8.07µA) with varia...
70
4.0
High Current Regulator
The Regulator is designed to power the devices that require currents upto 60mA. It is capable of providing the maximum output average load current of ...
71
4.0
Ultra-Low-Power (<140nA) Bandgap Voltage Reference in 40nm CMOS
The ODT-REF-40LP-SV1P8-ULP140N is an ultra-low power CMOS bandgap reference designed in a 40nm standard CMOS process without needing the use of any bi...
72
4.0
Ultra-Low-Power Bandgap Voltage Reference in GF 22 FDX
The ODT-REF-GF22FDX-SV1P8 is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve ...
73
4.0
Ultra-Low-Power Bandgap Voltage Reference in TSMC 4nm CMOS
The ODT-REF-SV1P2-4T is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve high ...
74
4.0
Low Current Regulator
The Regulator is designed to power the devices that require currents upto 1mA. It is capable of providing the maximum output load current of 1mA and o...
75
4.0
Power On Reset (POR)
HCLTech offers IP POR hcl_por_t40_v1 circuit provides a reset signal to the chip when supply ramps up so that the chip always starts in a known state...
76
4.0
Power On Reset (POR)
...
77
4.0
Power On Reset Circuit
The designated IP is a power on reset circuit intended for integration into 130nm CMOS technology System on Chips. RESET threshold value is determined...
78
3.0
1.2 V Bandgap Voltage Reference
The WEABG18NI12SFN21M22G is a band reference voltage that provides a 1.224 V output from an 1.8 V input. It is specified over the −40°C to +120°C temp...
79
3.0
1.5V Bandgap Voltage Reference
The WEA15BG45G consists of the bandgap core with switching mode which produces a constant current Iconst and a constant voltage Vconst (switch on), Pt...
80
3.0
1.5V Low – Dropout (LDO) Voltage Regulator
The WEA3615LD45G is a voltage feedback amplifier (series – shunt) which active part is comprised of a telescopic cascode amplifier stage, followed by ...
81
3.0
2.9V Low – Dropout (LDO) Voltage Regulator
The WEA3629LD45G is a high voltage ultra-low power Regulator designed for 5G mobile phones. It integrates PowerGood and Current limit functions and op...
82
3.0
10GHz to 15GHz Power Detector
The WEA1015PD130G is a differential ended envelope detector of 500mV output voltage . It has a differential input and is capable of detecting signals ...
83
3.0
76 GHz to 81 GHz Power Detector
The WEA7681PD22G is a single ended detector of 100 mV to 900 mV output voltage. It has a differential input and is capable of detecting signals over t...
84
3.0
BandGap Reference 1.5V BGR
BandGap Reference 1.5 V BGR...
85
3.0
Capless low input voltage LDO in GF 22FDX
Capacitor-less low input voltage LDO regulator in GlobalFoundries 22FDX...
86
3.0
DC/DC Buck Regulator
Inductor-based buck switching regulator generating the SoC internal voltage supply from rails, lithium coin cell or 2xAA batteries....
87
3.0
Adaptive Body Bias Subsystem enabling Process, Voltage & Temperature compensation to leverage FDSOI body biasing capabilities
All-in-one Adaptive Body Bias IP enabling Forward Body Biasing (FBB) for consumer and ULP IoT applications. It includes body bias voltage generator, l...
88
3.0
LDO linear regulator in TSMC 22ULL to supply logic and analog domains - up to 5.5 V input supply
LDO linear regulator in TSMC 22ULL to supply logic and analog domains - up to 5.5 V input supply...
89
3.0
LDO regulator in SMIC 40nm, 0.6~1.1v output
The present IP is a low dropout voltage regulator, which can support 10uA current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output volt...
90
3.0
LDO regulator in SMIC 40nm, 1.13v output
The present IP is a low dropout voltage regulator, which can support 10uA DC current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output v...
91
3.0
LDO regulator in SMIC 40nm, 1.42v output
The present IP is a low dropout voltage regulator, which can support 10uA DC current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output v...
92
3.0
LDO regulator in SMIC 40nm, 2.1v output
The present IP is a low dropout voltage regulator, which can support 360uA current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output vol...
93
3.0
LDO regulator in SMIC 40nm, up to 12mA
The present IP is a low-dropout (LDO) voltage regulator supporting a 12mA load current with an input voltage range of 2.7V to 3.6V (typical: 3.3V). It...
94
3.0
LDO regulator in SMIC 65nm, capless
The present IP is a low-dropout (LDO) and capacitor-less voltage regulator developed using SMIC's 65nm ETOX Nor Flash process. It generates adjustable...
95
3.0
Retention Alternating Regulator - High temperature (Grade 1, Tj=150�)
RAR-eSR-qLR-OV-LB-LS-ref-[2.7-5.5]-[0.55-3.3].07e, as any Power Management Virtual Component designed by Dolphin Design, is readily retargetable towar...
96
3.0
Retention Alternating Regulator - High temperature (Grade 1, Tj=150�)
RAR-eSR-qLR-OV-LB-LS-ref-[2.7-5.5]-[0.55-3.3].07e, as any Power Management Virtual Component designed by Dolphin Design, is readily retargetable towar...
97
3.0
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...
98
3.0
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
RAR-eSR-qLR-ref-[1.62-3.63]-[0.55-2.5].04, as any Power Management Virtual Component designed by Dolphin Design, is readily retargetable toward any su...
99
3.0
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...
100
3.0
Retention Alternative Regulator, combines high efficiency in normal mode and ultra-low quiescent current for sleep mode
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...